The working principle of the charcoal machine is straightforward and simple to comprehend. To fill the pulverizer with raw materials of biomass fibers that can be used to make charcoal (such as branches and straw), the pulverizer will crush them into 10mm pieces. These materials include branches, straw, peanut shells, trunks, cotton straw, tea seed husks, husks, weeds, and leaves, among others. A dryer is used to dry the powder to a moisture content of less than 12%, which is the desired result. This finished mechanism charcoal is formed by subjecting the rod to extremely high temperatures and high pressures (without the use of any additives) and then placing it in a wood carbonization furnace furnace for wood carbonization furnace furnace to form the final product. When a high-temperature continuous wood carbonization furnace furnace furnace is used, it is also possible to directly convert the material powder into carbon powder from the material powder.

What is the principle of operation of the charcoal machine?
The following is the manufacturing process for a charcoal machine:A carbonized product is formed after the material has been crushed and dried. The rod forming machine is then used to form the carbonized product. According to the order of equipment, the primary equipment includes a pulverizer, a dryer, a rod making machine, and a wood wood carbonization furnace furnace.

Bar machine and dryer are among the primary pieces of equipment, with a special machine for charcoal production serving as a secondary piece of equipment. The dryer has the capability of cutting and drying the material in one pass. There is no dip in the exhaust port. The material does not spray out of the discharge port; instead, it falls naturally. It can be used to manufacture four rod machines at the same time. The automatic temperature control rod manufacturing machine has the ability to make adjustments to the rod at any time. This technology not only ensures the quality of the stick, but it also ensures its compactness. Raw materials such as branches, leaves, sawdust, and other agricultural products are used in the production of this product. Crushed materials are pressurized and densified after they have been crushed. Because they have the potential to replace traditional coal, they are referred to as "straw coal."It is a relatively new type of fuel.

shisha charcoal making machine presshttps://www.youtube.com/watch?v=zi0DFuNVkzM

The mechanism charcoal machine manufacturing process is explained in detail.

1. The procedure for crushing. When it comes to the crushing process, the raw materials that have been collected must be crushed by a pulverizer in order for them to fit the particle size requirements.

2. The drying procedure. After the pulverizer has pulverized the material, the dryer dries the particles to the point where the material has reached a certain level of drying efficiency.

3. The program for creating rods. A rod making machine uses a high temperature to press the raw material into a rod that has a certain degree of dryness and a certain degree of hardness.

4. The process of carbonization furnace. In a  furnace, it is carbonized after it has been formed into salary rods, and after cooling, it is transformed into machine-made charcoal. Such procedures must be carried out with the assistance of specialized equipment, such as pulverizers, dryers, rod making machines, and  furnaces, among others.

In addition to understanding the mechanism charcoal machine's manufacturing process and mastering its operating technology, it is important to recognize that the mechanism charcoal machine's equipment is interconnected and that each type of equipment is extremely important. How to reduce the number of failures in the production process of the mechanism charcoal machine is a problem that every company that manufactures charcoal is extremely concerned with.

Because the charcoal machine production line necessitates manual intervention, it is possible that the problem is not with the equipment itself, but rather with the way the equipment is being operated. As a result, it is necessary to provide specific training to the individuals who will be operating the charcoal machine.