This article was genuinely published here and copied with permission.

Pneumatic is the branch of science that deals with pressurized air. Pneumatic air fitting is a standard type of pipe system whose purpose is to connect two attachable pipe sections. Pneumatic air fittings are generally used in many industries where the equipment is desired. Nowadays, the configuration of the Pneumatic Fitting has been automated due to the advent of advanced technology. Pisco air fittings offered by other brands cater to a wide range of applications, including pneumatically actuated valves, pneumatic motors, and much more equipment. In this article, our discussion will be confined to different types of pneumatic air fittings – choose the best type of befitting air fitting.

Plastic push-in fitting

Plastic push-in fitting is the most commonly used type of fitting. The primary purpose of designing this type is for the tubing of Polyurethane and Nylon. For an efficient mechanism, the pressure should be in the range of 0 to 150 psi when the fluid type is air. Signifying its material configuration, the collar is made of Nickel-plated Zinc, and the rest of the body is made of Nickel-plated Brass. This is the most suitable type of fitting for a considerable amount of pressure. However, the results are inimical when the temperature and pressure are high. You can contact the supplier if you want to buy these plastic push-in fittings. But make sure to test and get a certified product.

Brass push-in fittings

The material composition of Brash push-in fittings pneumatic is nickel-plated brass, and also some of them are made of glass-reinforced nylon. They are mostly proposed due to the quality of engaging and disengage quickly. They are perfect for environments where frequent alterations are required. They are befitted when the fluid type is air; the recommended pressure is between 0.8 and 15 bar. Brass push-in fittings have a significant advantage over plastic in fitting that they can be used in high-temperature environments as they are more durable.

Stainless steel push-in fittings

A stainless steel push-in fitting is the most befitting type because of its usage irrespective of the fluid type (Compressed air, gas, and liquids). Further, they can handle the system's extremely low and high temperatures and pressure with easy operating techniques (engaging and disengaging process). Renowned companies like Pisco make these fittings and build a pneumatic applications for different mechanisms such as robotics, conveyor system, and many more. For this device, the operating cost is around 0.99 – 15 bar, and the temperature scale is around 20 – 200 Celsius. The only drawback of using them is they are very costly.

Pneumatic push-on fitting

Pneumatic push-on fitting is also known as rapid screw fitting and is widely used in industries for its capability to withhold strength. The swivel part easily withholds the pipe's properties and prevents it from aggressive bending. This type of Pneumatic fitting requires no special tools for installation and congregation.

Conclusion

Hence, these are some of the common types of pneumatic fittings. If you are willing to buy fittings, you can refer to DAS Services, Inc. is well-known for catering best quality factory automation and robotic components at affordable rates. From pneumatic air fittings to vacuum equipment, they offer a wide range of products that are very useful for the effective performance of the machines.